首先在選擇濟南電纜橋架廠家時↟↟✘│·，重要的是要考慮重量(負載↟↟✘│·，在一定的跨度內支援)↟•。在架空纜索架或梯子的情況下↟↟✘│·，跨度為這些梯形之間的距離↟↟✘│·，與電纜支撐產品的整體長度相分離↟•。

　　First of all, when choosing Jinan cable bridge manufacturer, it is important to consider the weight (load I you want to support in a certain spanHold). In the case of overhead cable frames or ladders, the span is the distance between these ladder forms, which is separated from the overall length of the cable support product.

　　在很多情況下↟↟✘│·，你想要的負載越高↟↟✘│·，允許的大跨度就越短↟↟✘│·，因為更短的跨度可以支撐更多的體重↟•。較短的跨度也會導致較少的偏轉↟•。但是↟↟✘│·，如果您的支援產品需要更長的跨度和較少的固定點↟↟✘│·，則可以透過以下方法實現這一點╃▩：

　　In many cases, the higher the load you want, the shorter the allowed long span, because a shorter span can support more weight. A shorter span can also lead to less deflection. However, if your support product requires a longer span and fewer fixed points, you can do this by:

　　減少該跨度內每米允許的負荷↟•。在已安裝的產品上↟↟✘│·，所有已釋出的負載都假定為均勻分佈的負載↟•。支撐跨度是在你的托盤或梯子上的吊架之間的距離↟•。總體長度是支援產品的總長度↟↟✘│·，而不考慮“支援”的數量↟•。

　　Reduce the allowable load per meter within the span. On installed products, all published loads are assumed to be evenly distributed. The support span is the distance between the hangers on your tray or ladder. The overall length is the total length of the supported product, regardless of the number of "supported" products.

　　總的來說只有合理的設計濟南電纜橋架才能支撐起來↟↟✘│·，濟南蘇鑫電纜橋架多年生產經驗↟↟✘│·，擁有設計團隊↟↟✘│·，為您量身定製方案快來點選http://www.wingsios.com/product諮詢吧

相關文章╃▩：濟南電纜橋架廠家