其實山東電纜橋架中☁▩，比較常用的是槽式類橋架 ☁▩，想必大家對於施工中應該用哪種橋架型別以及如何定價感到頭疼☁▩，今天就帶大家瞭解一下吧☁╃☁▩。

　　In real Shandong cable bridge, the more commonly used is slot bridge, I think you should use which bridge type and how to price headache, today to take you to understand it.

　　橋架多數常用厚度在0.8-3mm這個範圍☁▩，不同的場合會用到不同的厚度☁▩，不同厚度的價格會相差很大☁▩，價格差別主要是受鋼材的價格以及加工成本的影響☁╃☁▩。橋架寬度和高度越大☁▩，相鄰厚度之間價格差也越大☁╃☁▩。

　　Most of the commonly used thickness of bridge is in the range of 0.8-3mm, different thickness will be used in different occasions, the price of different thickness will vary greatly, the price difference is mainly affected by the price of steel and processing cost. The larger the width and height of the bridge, the greater the price difference between the adjacent thickness.

　　橋架都會有國標厚度☁▩，國標厚度常用的有1.0mm↟•·☁╃、1.2mm↟•·☁╃、1.5mm↟•·☁╃、2.0mm☁╃☁▩。橋架的寬度通常在1.2米以下☁▩，高度通常在0.25米以下☁▩，每根的長度是2米☁▩，橋架的表面一般都會做防腐蝕處理☁╃☁▩。

　　The bridge will have the national standard thickness, the national standard thickness commonly used is 1. 0mm, 1. 2mm, 1. 5mm, 2. 0mm The width of the bridge is usually less than 1.2 meters and the height is usually 0. 5 percent. Below 25 meters, the length of each is 2 meters, the surface of the bridge will generally be anticorrosive treatment.

　　其中熱鍍鋅和冷鍍鋅比較常用☁▩，價格上是電鍍鋅的較高☁▩，冷鍍鋅要比熱鍍鋅貴差不多1倍☁╃☁▩。根據不同的場合會用到不同材質的橋架☁▩，常用的有鋼製☁▩，鋁合金☁▩，201不鏽鋼☁▩，304不鏽鋼等☁╃☁▩。

　　Hot galvanizing and cold galvanizing are more commonly used, the price is higher than galvanized, cold galvanizing is almost twice as expensive as hot galvanizing. According to different occasions, different materials of bridge will be used, commonly used are steel, aluminum alloy, 201 stainless steel, 304 stainless steel and so on.

　　在山東電纜橋架使用過程中☁▩，會有一些連線橋架的附件☁▩，常用到的有彎通和三通☁▩，一般情況下☁▩，彎通單價是同規格橋架米價的1.2倍☁▩，三通單價是同規格橋架米價的1.3倍☁╃☁▩。如果你還想了解更多的報價歡迎諮詢http://www.wingsios.com/product☁╃☁▩。

相關文章◕↟▩↟：山東電纜橋架